冷庫安裝省電不能單靠某一項事物來決定,為了更大程度的滿足客戶需求,為客戶做到節能省電,我們在前期冷庫安裝設計規劃時,要清楚的了解客戶所建冷庫要存放的物品,來制定更為細致的冷庫安裝規劃圖,減少后期一些資源的浪費。
The installation of electricity in the cold storage can not depend on one thing only. In order to meet the customer's needs to a greater degree, to save energy and save electricity for the customers, we should clearly understand the items that the customer built in cold storage when we install the design and planning of the cold storage in the earlier period. The waste of resources.
在冷庫安裝前,作為冷庫安裝商家,必須要到客戶冷庫安裝的實地進行考察,看場地,根據客戶提供場地的具體情況來選擇冷庫安裝的具體位置。通常情況,若客戶要求的冷庫安裝地區在市中心,空間相對會比較緊張,因此對前期冷庫安裝的空間規劃可能會有更高的要求
Before the installation of cold storage, as a cold storage installation business, it is necessary to inspect the installation of the customer's cold storage, see the site, and select the specific location of the cold storage installation according to the specific situation of the customer. In general, if the client is required to install the cold storage area in the center of the city, the space will be relatively tight, so the space planning for the installation of the pre cold storage may have higher requirements.
若客戶提供的冷庫安裝地址位于郊區或人煙比較少的地區,則對整體的冷庫安裝空間設計規劃要求相對較低,但這里需要注意的是,若冷庫安裝地址在偏遠地區,則要考慮冷庫的配套設施,比如充足的水源和電力等
If the cold storage location provided by the customer is located in the suburb or less populated area, the requirements for the design and planning of the whole cold storage installation are relatively low, but it should be noted that, if the installation address of the cold storage is in remote areas, the matching facilities for cold storage, such as sufficient water and electricity, should be considered.
以蒸發器為例,當蒸發的溫度每降低1℃,冷庫的整體運作則要多耗電3-4%。當冷庫庫房內溫度一定時,隨著蒸發溫度與庫房內溫度溫差的縮小,蒸發溫度就能相應的提高,因此,如果冷庫冷凝溫度保持不變,則就意味著制冷壓縮機制冷量的提高,換言之,在獲得相同的制冷量的情況下,可以減少冷庫的能耗。
Taking evaporator as an example, when the evaporation temperature is reduced by 1 degrees, the whole operation of the cold storage will consume more electricity than 3-4%. When the temperature of the cold storeroom is fixed, the evaporation temperature can be improved with the reduction of the temperature difference between the evaporation temperature and the temperature in the storeroom. Therefore, if the condensing temperature of the cold storage remains constant, it will mean the increase of the cooling capacity of the refrigeration compression mechanism, in other words, the cold storage can be reduced in the case of obtaining the same refrigerating capacity. Energy consumption.
本文由山東冷庫造價為您提供,我們的網站是:http://www.sddslk.com我們將以全心全意的熱情為您提供更優質的服務,歡迎您的訪問!
This article from Shandong cold storage cost for you to provide, our website is: http://www.sddslk.com we will be wholehearted enthusiasm to provide you with more quality service, welcome to your visit!