女朋友水太多进去就软了,伊人久久大香线蕉av影院,被十几根触手扒开腿猛戳动漫 ,暴露yín荡女友17部分

1、制冷能力不足問題分析及解決方案：

1, insufficient refrigeration capacity analysis and solutions:

① 吸氣過濾器阻塞, 吸氣壓力丟失過大, 使吸氣壓力降低, 容積功率降低: 拆下吸氣過濾器的過濾網清潔。

The suction filter is blocked, the suction pressure is lost too much, the suction pressure is reduced, and the volume power is reduced: the filter net of the suction filter is cleaned.

② 滑閥的方位不合適或其它毛病: 查看指示器并調整方位維修滑閥。

The position of the slide valve is not suitable or other faults: view the indicator and adjust the azimuth maintenance spool valve.

③ 機器不正常的磨損, 形成問隙過大: 調整或替換零件。

Machine abnormal wear, forming too large gap: adjust or replace parts.

④ 吸氣壓力低于蒸騰壓力： 查看閥門 ( 如吸氣截止閥或止回閥等 )

The inspiratory pressure is lower than the transpiration pressure: check the valve (such as suction stop valve or check valve, etc.)

⑤ 高低壓體系間走漏; 查看開車、泊車所用的旁通管路。

The high and low voltage system leakage; bypass pipeline for driving and parking view.

⑥ 噴油量缺乏, 不能實現密封效果: 查看安全閥是否密封, 查看油路、油泵、油過濾器, 進步油量。

The injection quantity deficiency, can not achieve the sealing effect: check whether the safety valve seal, check the oil, oil pump, oil filter, oil production progress.

⑦ 機器排氣壓力遠高于冷凝壓力, 容積功率降低: 查看排氣體系管路及閥門, 鏟除排氣體系的阻力。如體系進入空氣應予以掃除。

The machine exhaust pressure is much higher than the condensing pressure, reduce the volume of power: check the pipeline and the valve exhaust system, exhaust system to eradicate resistance. If the system enters the air, it should be swept away.

2、潤滑油油壓出現的問題及解決方案：

2, lubricating oil pressure problems and solutions:

① 各軸間隙過大或部分油路漏油：查看修補。

Each shaft clearance is too large or part of the oil leakage: check repair.

③ 油泵問隙過大、磨損： 查看修補或替換。

Pump clearance is too large, wear: check, repair or replace.

④ 曲軸箱油量缺乏：增加潤滑油。

The crankcase oil content is insufficient: increase the lubricating oil.

⑤ 吸油過濾網阻塞：拆下清潔。

Oil filter screen blockage: remove the clean.

⑥ 油壓調節閥失靈:：查看修補。

The oil pressure regulating valve failure: check repair.

以上便是山東冷庫造價今天的分享，您還滿意嗎，歡迎關注我們的網站:http://www.sddslk.com并且關注我們的產品，我們將為您提供優良的產品，衷心的愿與您建立合作關系

The above is the Shandong cold storage cost sharing today, you are satisfied with it, welcome to pay attention to our website: http://www.sddslk.com and pay attention to our products, we will provide you with good products, sincerely willing to establish a cooperative relationship with you