一、冷庫建造的具體步驟:
First, the concrete steps of cold storage construction:
1.安裝庫體。庫體一般可以分為小型庫體和大型庫體,小型庫體基本上是用庫板拼裝的組合冷庫,大型庫體多是用土建冷庫,拼裝或者是建造好的庫體一般要求要平整,緊密結實,無空心感,承重,防凍,防潮,等都要符合工程要求。
1. install library body. The reservoir body can generally be divided into small and large library library, a small library body is basically the combination of cold storage plate assembly, large base body is cold storage construction, assembly or base body build good general requirements should be smooth, dense, hollow, bearing, antifreeze, anti surge. Are to meet the engineering requirements.
2.準備工作,食品冷庫準備好冷庫的工程規劃,準備好施工場地和施工材料。冷庫施工的各種材料都是根據客戶需要來定制的,整理出符合要求的施工場所,把所有安裝材料運到施工場地,核對材料質量和型號,確認無誤后開始安裝冷庫。
2. preparation, preparation of cold storage project planning, preparation of construction site and construction materials. All kinds of materials of construction of cold storage are customized according to customer needs, sorting out the construction site in accordance with the requirements of the installation, all the materials transported to the construction site, check the material quality and type, the confirmation after the start of the installation of cold storage.
3.連接制冷系統。要用電線,銅管等把冷庫的制冷機組,電控系統等部件連接起來,連接管道要連接緊密,并且有相應的保溫、保護措施。
3. connect the refrigeration system. It is necessary to connect the refrigeration units, electric control systems and other parts of the cold storage with wires, copper pipes, etc. the connecting pipes need to be closely connected and have corresponding thermal insulation and protective measures.
二、冷庫的維修和日常維護保養
Two 、 cold storage maintenance and routine maintenance
1.密封保護.由于裝配冷庫是有保溫板塊拼成的,因此板之間存在一定的縫隙,施工中這些縫隙會用密封膠密封,防止空氣和水分進入,所以在使用中對一些密封失效的部位及縫補,要堅決出現逃冷的情況出現。
The 1. seal protection. Because there is a cold storage insulation plate assembly together, so there is a certain gap between the board, in the construction of these cracks will be sealed with sealant, to prevent air and water to enter, so in the use of some parts of the seal failure and sewing, resolutely fled the situation appears cold.
2.冷庫及制冷設備安裝完畢或者長期停用后,再次使用,應進行全面的檢查,在指標都正常的情況下,有技術人員的指導放可啟動使用。
2. cold storage and refrigeration equipment installed or long-term use again after stopping, should conduct a comprehensive inspection, in the indicators are normal circumstances, there are technical personnel guidance, you can start using.
3.保溫保護.使用中注意硬物都冷庫的碰撞和刮劃,因為可以造成凹陷和銹蝕,嚴重的會造成局部保溫性能降低。
3., heat preservation. Use in the attention of hard objects are cold storage collision and scratch, because it can cause pitting and corrosion, serious local insulation performance will be reduced.
本文由食品冷庫的友情奉獻.更多有關的知識請點擊:http://www.sddslk.com/我們將用最先進的技術.最真誠的態度.為您提供最為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.
This paper consists of food storage friendship devotion. More related knowledge please click: http://www.sddslk.com/ we will use the most advanced technology. The most sincere attitude, to provide you with the most comprehensive service. More related knowledge and we will continue to offer. Please look forward to.