山東冷庫造價節能控制系統的主要特點以及存在的問題, 冷庫經過了原始的機械制冷、氨液設備制冷、氟設備制冷一直到現在環保節能冷庫，一步步走向今天更節能、更環保、更有效的自動化管理。
The main characteristics of energy saving control system and the existing problems of cold storage after the original mechanical refrigeration equipment, refrigeration equipment, liquid ammonia fluorine refrigeration until now, environmental protection and energy saving refrigerator, a step toward today more energy-saving, more environmental protection and more effective automation management.
1、壓縮機三角起動時對壓縮機設備以及電網沖擊，影響設備使用壽命;而且，設備起動完成后只能全速運行，通過調整回氣閥門(蒸發壓力)開口度來控制制冷能力。造成電耗浪費，設備故障率較高，運行的經濟性差。
1, the compressor delta starting the compressor equipment as well as the impact of the power grid, affect the service life of the equipment; moreover, equipment starting operation only after the completion of full speed, by adjusting the air return valve (evaporation pressure) to control the cooling capacity of opening. The power consumption is wasted, the equipment failure rate is high, and the operation economy is poor.
2、冷庫設備自動控制水平低，完全依賴于人工操作，而人的主觀能動性與技術水平等，因人因時等都有很大的差異，難以達到最佳控制。
2 cold storage equipment, low automatic control level, completely rely on manual operation, and people's subjective initiative and technical level, because when there are great differences, it is difficult to achieve optimal control.
3、各分支庫根據儲物不同或出入庫情況變化以及保溫性能差異，難以做到各分支庫根據自身需求，分別自動調節制冷量，對原不需要制冷的分支庫造成過度制冷的浪費現象;蒸發器除霜以及冷卻水泵運行難以達到最佳效果。
3, according to the different branches of the library storage or storage conditions change and insulation performance differences, difficult to achieve various branches of the library according to their own needs, which automatically adjust the cooling capacity of the original, without Branch refrigeration caused excessive cooling waste; defrosting and cooling water pump operation is difficult to achieve the best effect.
4、冷庫的自控系統采用S7 PLC控制與編程;通過MPI通訊實現與上位機之間的數據通訊;對于大型冷庫，采用Profibus-dp通訊方式，與各分支冷庫、冷卻間控制設備實現全數據交流;
Automatic control system of 4 cold storage using S7 PLC control and programming; communication through MPI data communication between the host computer; for large cold storage, the use of Profibus-dp communication, and each branch of the cold storage, cooling control data exchange equipment;
5、對調節站的進氣閥改為電動機構，增設各類所需的傳感器，實現PLC自動控制。
5. The intake valve of the control station is changed into an electric mechanism, and various types of sensors are added to realize the automatic control of the PLC.
6、制冷壓縮機采用交流變頻調速裝置拖動;通過modbus通訊與PLC實現全數據交換以及控制;
6. The refrigeration compressor is driven by AC frequency conversion device. The whole data exchange and control are realized by Modbus communication and PLC;
本文的精彩內容來自山東冷庫造價詳細內容請點擊我們的官方網站:http://www.sddslk.com/謝謝您的到來!
The exciting content of this article comes from the details of the cost of Shandong cold storage. Please click on our official website: http://www.sddslk.com/ thank you for coming!
魯公網安備 37010402001149號 網站地圖 XML
