女朋友水太多进去就软了,伊人久久大香线蕉av影院,被十几根触手扒开腿猛戳动漫 ,暴露yín荡女友17部分

冷庫內的冷量之所以走失在很大部分是由冷庫門造成的，冷庫的安裝質量好壞很大程度上取決于冷庫門的安裝。下面鑫捷能制冷就跟您說說如何減少冷庫的冷量損失。
Cold storage in the cold quantity is lost in large part caused by a cold storage doors, cold storage installation quality depends largely on the refrigerator door installation. The following xin jie can refrigerate to tell you how to reduce the cold quantity loss of freezer.
冷庫門就相當于人的咽喉，工作人員的不停的進出冷庫，搬運貨物進出，甚至冷熱空氣之間的熱量交換，都是通過它，所以冷庫門也是管理冷庫的主要部位。熱的空氣通過庫門開啟滲入庫內，不僅造成了熱量增加，庫溫增加，庫溫升高，而且大量的熱濕交換，使冷風機或蒸發器排管結霜，導致庫內溫、濕度波動，影響產品貯藏質量。
Refrigerator door is equivalent to the throat, the staff of the in and out of the cold storage, transport of goods in and out, even heat exchange between cold and hot air, is through it, so the refrigerator door is the main part of the refrigerator. Hot air through the library door opening into the house of the rolls, not only caused the increase of quantity of heat, temperature increase, high temperature, and a lot of heat exchange, the exhaust pipe cooling fan or evaporator frosting, lead to temperature and humidity fluctuations of the rolls, affect the quality of product storage.
冷庫對冷庫門進行有效的維護，確保冷庫門無故障啟閉，定期檢查密封條和電熱絲的性能，隨時處理冰、霜、水，保持冷藏門的嚴密性，防止運輸工具碰撞庫門。我們應盡量減少開門次數和開門時間，做到進、出隨手關門。建議客戶在冷庫門內側加掛棉門簾或PVC軟門簾。建議客戶在冷庫門外側設高效空氣幕，并保證安裝正確，運轉正常。
Effectively for the refrigerator door refrigerator maintenance, to ensure the refrigerator door trouble-free, regularly check the sealing strip and the performance of the heating wire processing of ice, frost, water at any time, keep the refrigerator door rigor, prevent the transport collision library door. We should try to minimize the number of open doors and open doors and close the door. The client is advised to add a cotton door curtain or PVC soft curtain to the inside of the refrigerator door. It is recommended that the client set up the effective air curtain on the outside of the refrigerator door and ensure that the installation is correct and normal.
您有任何制冷方面的問題，隨時聯系我們，鑫捷能制冷隨時為您服務。
You have any problem with refrigeration, we are always in contact with us.