女朋友水太多进去就软了,伊人久久大香线蕉av影院,被十几根触手扒开腿猛戳动漫 ,暴露yín荡女友17部分

講解冷庫保溫板的安裝要求：
Explain the installation requirements of cold storage insulation board:
1、冷風機與庫板間隙要大于冷風機的厚度。
1, air cooler and base plate clearance should be greater than the thickness of air cooler.
2、選擇吊點位置時，首先考慮空氣循環最好的位置。其次再考慮庫體結構方向。醫藥冷庫
2, choosing lifting point location, first consider the best location for air circulation. Direction of the library structure be a secondary concern.
3、冷風機所有吊栓應全部緊固。并用密封膠將螺栓及吊栓穿孔封閉，防止冷橋和漏氣。
3, cooling fan all the lifting bolt should be tighten. With sealant swing bolts and bolt hole closed, prevent cold bridge and air leakage.
4、吊頂風機過重時，應用4號角或5號角鐵做過梁。過梁應橫跨到另一塊頂板和墻板上，以減輕承重。
4, ceiling fan is overweight, 4 or 5 horn horn iron do lintel. Lintel should be across to another piece of roof and wall panels, to alleviate the load bearing.
本文由醫藥冷庫友情奉獻。更多有關的知識請點擊：http://www.sddslk.com/我們將用最先進的技術。最真誠的態度。為您提供最為全面的服務。更多有關的知識我們將會陸續向大家奉獻。敬請期待。