冷庫安裝的三點注意事項
The three considerations in installation of the refrigerator
1.施工把關不嚴格,“圍護結構兩側設計溫度差等于或大于5攝氏度時,應在溫度較高的一側設置隔氣層如果不嚴格執行將會對食品冷庫的質量造成影響。嚴格把好質量關,選用好的保溫板(聚氨酯)。
醫藥冷庫
1. The construction control is not strict, "retaining structure design temperature difference on both sides is equal to or greater than 5 degrees Celsius, shall be installed in the side of the higher temperature, gas insulation if not strictly implement will affect the quality of the food cold storage. Strictly to good quality, choose good insulation board (polyurethane).
2、冷庫設備的頂板不應堆放雜物,否則食品冷庫板會變形而影響保溫性能,應保持冷庫周圍通道暢通無阻,確保散熱良好。冷庫安裝的位置應保持干燥、潔凈、無易燃易爆物品、確保沒有任何安全隱患。蒸發器前需預留一定的空隙以免影響制冷效果。
2, cold storage equipment of roof should not pile up sundry, otherwise the food cold storage board will affect the heat preservation performance, deformation should be kept in the cold storage channel is around, ensure good heat dissipation. The location of the cold storage installation should be kept dry, clean, no inflammable, explosive, ensure no safe hidden trouble. A certain amount of space before the evaporator so as not to affect the refrigeration effect.
3、由于對冷庫防潮隔氣保溫層的認識存在一些誤區,從設計開始就對冷庫的工作原理以及外部環境對冷庫運行的影響存在糊涂認識,認為防水隔氣層做與不做,對冷庫保溫效果影響不大,更有甚者認為做與不做,選用什么材料做沒有太大差別,因此設計這一關,把關不到位。
3, of cold storage on the damp air thermal insulation layer of insulation to know there is some misunderstanding, since the design of the working principle of cold storage and the influence of external environment on the refrigerator running there confused understanding, think of waterproof insulation atmosphere, doing and not doing influence on cold storage heat preservation effect is not big, what's more think, do and not doing what choose the material is not too big difference, so this design, control does not reach the designated position.
本文由醫藥冷庫安裝設備有限公司整理發表提供,詳情請關注公司網站:http://www.sddslk.com/