女朋友水太多进去就软了,伊人久久大香线蕉av影院,被十几根触手扒开腿猛戳动漫 ,暴露yín荡女友17部分

冷庫安裝過程中需要注意的幾點細節
Cold storage installation process need to pay attention to some details
1、冷藏庫機組安裝冷庫機組位置離蒸發器越近越好，且易維修，散熱良好，如外移需安裝遮雨棚，冷庫機組位四角需要安放防震墊片，安裝水平牢固，不易被人碰著。食品冷庫
1, the cold storage system with cold storage installation position as close to the evaporator, the better, and easy maintenance, good heat dissipation, such as offshoring need to install the canopy, cold storage units need to put in the four corners shockproof washers, installation level and firm, not easy to be touched.
2、電線排放所有電線除用空調扎帶扎好外，需用波紋軟管或走線槽穿管保護，溫度顯示導線盡量不與電線靠在一起排線。
2 in addition to use air conditioning, electrical, discharge all wire cable tie fasten, using corrugated hose or go trough wear pipe protection, temperature display wire try not together ribbon cable and wire.
3、冷庫建造的制冷系統連接因冷庫機組的冷凝器、蒸發器在廠里都經過打壓密封，因此開封時，都應有壓力，可查是否有漏，出廠銅管應兩頭有封塵措施，施工時也要注意隨時密封，以防水灰塵進入管內，冷凝器→冷庫主機→蒸發器，銅管連接以焊接方法，接口牢固美觀。
3, cold storage refrigeration system connection because of the cold storage unit condenser, evaporator have been suppressed sealed in the factory, so in kaifeng, should have the pressure, to check whether there is leakage, the factory copper pipe should be two head seal dust measures, also should pay attention to during the construction of seal at any time, to waterproof and dust into the tube, to cold storage host, evaporator, condenser copper pipe connected to the welding method, the interface is strong and beautiful.
本文由食品冷庫公司友情奉獻.更多有關的知識請點擊:http://www.sddslk.com/我們將用最先進的技術.最真誠的態度.為您提供最為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.