女朋友水太多进去就软了,伊人久久大香线蕉av影院,被十几根触手扒开腿猛戳动漫 ,暴露yín荡女友17部分

冷庫安裝過程中需要注意的細節問題：
Cold storage installation process need to pay attention to the details of the problem:
1、冷藏庫機組安裝冷庫機組位置離蒸發器越近越好，且易維修，散熱良好，如外移需安裝遮雨棚，冷庫機組位四角需要安放防震墊片，安裝水平牢固，不易被人碰著。
1, the cold storage system with cold storage installation position as close to the evaporator, the better, and easy maintenance, good heat dissipation, such as offshoring need to install the canopy, cold storage units need to put in the four corners shockproof washers, installation level and firm, not easy to be touched.
2、冷庫建造的制冷系統連接因冷庫機組的冷凝器、蒸發器在廠里都經過打壓密封，因此開封時，都應有壓力，可查是否有漏，出廠銅管應兩頭有封塵措施，施工時也要注意隨時密封，以防水灰塵進入管內，冷凝器→冷庫主機→蒸發器，銅管連接以焊接方法，接口牢固美觀。
2, built cold storage refrigeration system connection because of the cold storage unit condenser, evaporator have been suppressed sealed in the factory, so in kaifeng, should have the pressure, to check whether there is leakage, factory copper pipe should be two head seal dust measures, also should pay attention to during the construction of seal at any time, to waterproof and dust into the tube, to cold storage host, evaporator, condenser copper pipe connected to the welding method, the interface is strong and beautiful.
3、電線排放所有電線除用空調扎帶扎好外，需用波紋軟管或走線槽穿管保護，溫度顯示導線盡量不與電線靠在一起排線。

3, electrical, emissions all wires, besides using air conditioning cable tie fasten with corrugated hose or go trough wear protection, temperature display wire try not together ribbon cable and wire.

本文由食品冷庫設備有限公司發表提供，詳情請關注公司網址：http://www.sddslk.com/