女朋友水太多进去就软了,伊人久久大香线蕉av影院,被十几根触手扒开腿猛戳动漫 ,暴露yín荡女友17部分

冷庫機組蒸發器的安裝規范事項：
The installation of cold storage unit evaporator specification items:
1、冷庫機組銅管排放全部銅管需作別穿保暖管與同方向電一重新任用空調扎帶一塊兒綁扎好，盡力走直管并分段固定。
1, cold storage units into the pipe emissions all need to wear warm tube with the same power over reinstating air conditioning tie binding together well, try to walk straight and fixed.
2、電排放全部電除用空調扎帶扎好外，需用斑紋軟管或走槽穿管盡力照顧，溫度顯露導盡力不與電靠在一塊兒排。
2 electrical use air conditioning, electric discharge all cable tie fasten, using speckle hose or go trough wear tube try our best to take care of, temperature show guide to row with electricity on.
3、冷庫機組安裝冷庫機組位置離蒸發器越近越好，且易維修，散令人滿意，如外移需安裝遮雨棚，冷庫機組位四角需求安插防震墊片，安裝水準堅固，不易被人碰著。
3, cold storage system with cold storage installation position as close to the evaporator, the better, and easy maintenance, satisfactory, such as offshoring need to install the canopy, the cold storage unit corners needs installing shockproof washers, installation level is strong, not easy to be touched.
4、、把吊裝螺釘孔開好，并開好銅管及電孔，后二孔要修整以防快口留下隱患，自配排水管的蒸發器背面與立板定位為300，蒸發器排水孔與立板預平安的排水孔位鉛直，兩者間高差為250，如是速凍冷庫，排水管內穿排水電絲，排水電絲發部位，只能伸到庫板內50處，排水管外部保暖處置，冷藏不需電絲，其他相同。
4, and the lifting screw hole is good, and good copper pipe and electric hole, after the second hole to repair in case of quick mouth left hidden trouble, since with a drain on the back of the evaporator and vertical plate positioning for 300, evaporator and drain board scupper a straight, in the process of the peace between the elevation difference is 250, so frozen cold storage, the drainage tube wear drainage electric wire, drainage electric wire location, only to 50 libraries the plate and the drain external thermal disposal, refrigeration without electric wire, the other is the same.